Manualshelf

Installation Guide

ManualsBrandsHunter ManualsHeating, Ventilation, and Air ConditioningGarden District Decorative Brushed Nickel 70 CFM Ceiling Exhaust Fan
11121314151617181920
16
D20
D17
D18
D19
D21
D22
Turn on the power source.
Test the motor. If the motor does not run, check the
plug connection.
Secure the motor by tightening the 2 screws.
Install the wiring cover plate.
Reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched between the
motor and the housing.
ON
OFF
D22
48050-01 - R20151220
Connect wiring from the motor to the wiring cover plate.
DO NOT ALLOW THE MOTOR TO HANG FROM THE
WIRING HARNESS.