Installation Guide

7
A20
A21
ON
OFF
0000
A17A17
A17
0000
A18
A19
Reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched between the
motor and the housing.
Turn on the power source.
Secure the motor by tightening the 2 screws.
Test the motor. If the motor does not run, check the
plug connection.
E1
A22
48050-01 - R20151220
Go to step E1 on page 17 to attach grill.
Connect wiring from the motor to the wiring cover plate.
DO NOT ALLOW THE MOTOR TO HANG FROM THE
WIRING HARNESS.