Instructions / Assembly

48050-01 12/01/2013

[a]

Plug in wiring harness.

Remove the two star nuts.

Insert the strain relief bracket’s dog-leg tab so that it hooks over

the lip of the motor. Reinstall the strain relief bracket screw.

Feed the mounting cable through the hiding plate, then attach

mounting cable [a] to the support bracket.

Align posts B and D (stamped into motor housing) with posts B

and D (stamped into light fixture). Slide support bar and hiding

plate onto posts.

NOTE: The grill’s size, shape, and number of lights may vary.

Raise the bezel onto the threaded rod of the support bracket.

Attaching the grill