Owner's Manual

6
OPERATION
This appliance is for household use only.
1. Place the fan on a dry, safe, at
surface where it cannot fall or
be pulled by the cord.
2. Plug the fan into a grounded
120-volt AC electrical outlet
(ordinary household current).
DO NOT use any other type of
outlet. Make sure that the rated
voltage of the fan is the same
as the power source before
plugging it into the power
source.
3. Turn the fan on or off by
pushing the Power/Speed
Switch. The power should
always be OFF before
unplugging the fan.
4. To select the speed, turn the
Power/Speed Switch from OFF
to the desired speed setting:
I (low), O (off), II (high).
5. To control the upward and
downward direction of airow,
loosen the tilt knob on the side
of the fan. Adjust to the desired
angle and tighten the knob.
Handle
Power/Speed
Switch
Tilt Knob
Base
FIGURE 6