Use and Care Manual

12
MAINTENANCE
This fan is permanently lubricated and will not require
additional lubrication (oil) for the life of the fan.
This fan requires little maintenance and contains
no user serviceable parts. DO NOT try to fix
it yourself. Contact qualified service personnel
if servicing is needed.
DO NOT immerse the fan in water or any other liquid.
CLEANING THE GRILL AND BLADE:
1. Turn the fan off and unplug from the electrical outlet.
2. Disassemble the grills by loosening the screw holding
the grill ring and remove it from the grills.
3.
Pull the front grill from the back.
4. The blade may be removed by loosening the screw
holding it in place. Grills and blades may be cleaned
with mild soap and water only after they have been
removed from the motor housing.
5.
3 Use a soft, slightly damp cloth to wipe the remaining
fan parts.
3 DO NOT allow water or any other liquid to get into
the motor housing or base.
3 Reassemble the fan after blades and grills have
dried completely.
3 DO NOT plug the fan into an electrical outlet until it
has been fully reassembled.
61902-01 R20141230
the fan.
outlet. Wipe off excess dust with a lint-free cloth. To ensure
adequate air circulation to the motor, keep vents located
at the rear of the motor free from dust accumulation. A
vacuum cleaner hose can be used to clean these vents.
Before cleaning, turn the fan off and unplug from electrical
Use a dry or slightly damp lintfree cloth to clean
Two tabs hold the front grill and rear grill together.