Manual

MA001-01 • 07/22/13
1.888.830.1326
9
TYPE-C ASSEMBLY INSTRUCTIONS (CONTINUED)
Installing the bulb - Install a bulb into
each socket. When necessary, replace
bulbs with bulbs of same type and
wattage.
Socket
If necessary, attach the extension chain
provided to the fan pull chain coming
from the switch housing. Then feed the
end of the extension chain through the
grommeted hole in the light kit.
Grommeted
Hole
Light Pull
Chain
Fan Pull
Chain
Installing the pull chain pendant -
Attach the pull chain pendants to the
end of the short chains coming from the
switch housing and the light kit. Turn
power on. Your installation is complete.
Installing the globe-Press the globe and
globe keeper ush against the metal plate.
Thread the light pull chain through the hole
in the center of the nial cap and thread
the fan pull chain through the hole in the
side of the cap. Finally, thread only the light
pull chain through the hole in the nial and
screw the nial onto the threaded rod.
7
6
8
5
Globe
Globe
Keeper
Finial Cap
Finial