Installation Guide

MA010-01 • 08/23/13
2
How to Properly Install Multiple Remote-Controlled Fans (continued)
If you want to install multiple fans operating on a single remote control, simply follow the instructions in your Owner’s
Manuals, including the remote control pairing instructions. Your remote must be paired within 3 minutes of restoring
power to your fan. Pair each fan individually, or you may pair all fans simultaneously if they are all within range of the
remote control transmitter. (Please refer to the Remote Control chapter of your fan’s Owner’s Manual for further instructions on pairing your
remote.)
Note: Each fan must be wired to a receiver in the canopy. (Please refer to the Wiring chapter of your fan’s Owner’s Manual for more details.)
Installing Multiple Fans Operating on a Single Remote Control (Handheld or Wall Control)
Fan style and remote style may vary.
Installing One Fan Operating on Multiple Remote Controls (Handheld or Wall Control)
Fan style and remote style may vary.
If you want to install one fan operating on multiple remote controls, simply follow the instructions in your Owner’s
Manuals, including the remote control pairing instructions. Each remote must be paired within 3 minutes of restoring
power to your fan. (Please refer to the Remote Control chapter of your fan’s Owner’s Manual for further instructions on pairing your remote.)
Note: If necessary in order to complete the procedure within 3 minutes of power restoration, you may turn power at your
circuit breaker off and back on between pairing each remote.
Note: These instructions apply only to 99XXX series remote models and 5XXXX series fan models with remotes included. The instructions are applicable to handheld and wall control models.