Owner's manual

MA021-01 • 03/06/14
1.888.830.1326
5
Installing the globe- Position the
indentations in the outer rim of the globe
so that they line up with the tabs on the
inside surface of the light xture rim.
Carefully lift the globe up inside the light
xture as far as it will go. Rotate the globe in
a clockwise direction until it is held tightly
in place by the four tabs.
Indentation
Tab
ON
Turn Power
Installing the pull chain pendant -
Attach the pull chain pendant to the
end of the short chains coming from the
switch housing and the light kit.
Turn power on. Your installation
is complete!
TYPE-A ASSEMBLY INSTRUCTIONS (CONTINUED)
7
6
8
Installing the bulbs - Install a bulb into each
of the sockets. When necessary, replace with
bulbs of same type and wattage.
Bulb
Socket
5