Use and Care Manual

OPERATING INSTRUCTIONS

Functions of the Keys and Symbols

Fan Operation

Plug cord into any standard 120 volt

AC outlet.

The fan can be controlled by using the

remote control or the buttons on the

control panel on the fan body.

Speed Button:

Select the desired speed by pressing the Speed button which will adjust

the fan speed to Speed Low, Med, High and back to Low as a

sequence. The display will show the speed selected.

Power Button:

Press the button once, the fan will start at Low speed. The LED will

light up. Press again to switch the fan off.

61805-01 20190228

Control Panel

Timer Button:

This fan is equipped with an automatic shut off feature. To select

desired length of operation, press the Timer button a number of

times until the LED indicates the desired operation time: 1-hour,

2-hour or 4-hour.

Left/Right OSC Button:

To activate the Left/Right Oscillation feature, press the button once.

Press again to cancel.

Mode Button:

Press "Mode" button to choose the wind type, meanwhile the

corresponding light will be lit.

"Normal":

Wind blow based on Low/Medium/High speed.

"Natural":

Figure 7.