Infrared Heater With Remote Control Owner ,s Manual English Model H1500RC-CHY H1500RC-BLK
INTRODUCTION Thank you for choosing the Hunter Infrared Heater. This manual gives you complete instructions for using your heater. SAFETY AND WARNINGS READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! SAVE THESE INSTRUCTIONS FOR REFERENCE.
11. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked. 12. A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored. 13. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, injury to persons, or other damage to property. 14.
GROUNDING INSTRUCTIONS Grounded Plug This appliance is for household use only and may be plugged into any 120-volt AC electrical outlet (ordinary household current). DO NOT use any other type of outlet. WARNING: This unit is suitable for grounded receptacle use only. Grounding Pin The cord has a grounded plug as shown in Figure 1. An adapter, Grounded Outlet Box Cover Figure 1 as shown in Figure 2, is available for connecting three-blade grounding-type plugs to two-slot receptacles.
PARTS OF THE HEATER Parts of the Heater 1 Symbols 2 6 1. Control Panel Power Button 2. Safety Grille H/L Heat Button 3. Castors °C/°F Temperature Button 4. Remote Control High Temperature Setting Button 5. Remote Control Sensor Low Temperature Setting Button 6. Washable Air Filter Timer Button (Figure 3) 3 5 4 Figure 3 (Figure 4) OPERATING INSTRUCTIONS Operation 1. Place the heater on a firm and level surface. 2. Plug the cord set into a 120 volt AC outlet.
Timer Function (Figure 5) The timer function may be activated when the heater display is in any function. This function allows you to set the length of time the heater will run before turning itself off, from 0 hour to 8 hours. " 0 " means there is no set running time and heater will run continuously. Pressing the Timer Button will increase the length of time by 1 hour each time when this button is pressed.
MAINTENANCE 1. Press the Power Button to turn the heater OFF and unplug the heater before moving or cleaning. 2. Interior dust can often be removed by using a vacuum cleaner with a crevice tool attachment. 3. To clean the enclosure, use a clean, soft and lightly damp cloth to gently wipe off the dirt from the surface of the unit. Be sure not to wet the Heating Element and the switches. Allow the unit to dry completely before use. 4. Do not use cleaning liquid or other chemicals to spray on the unit. 5.
FCC WARNING FCC WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ar W ra y nt IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RESPECT TO THE GLASS GLOBES OR LIGHT BULBS OR THE FINISH ON ANY METAL PORTION OF THE HEATER. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES.