Warranty

Hunter Products Backed by a Guarantee
Hunter Industries Incorporated (“Hunter”) warrants the following products to be free of defects
in materials or workmanship under normal use for a period of one (1) year from the original date
of manufacture: SRM family and Micro Sprays. Hunter warrants the following products to be
free of defects in materials or workmanship under normal use for a period of two (2) years from
the original date of manufacture: PGP-ADJ
®
, PGJ, MP Rotator family, PS Ultra family, Spray
Nozzles, PCN, PCB, AFB, PGV family, SRV, X-Core family, Pro-C family, ROAM XL,
ROAM, NODE, WVP, WVS, ACZ, PCZ, PSR, HCV, SJ, FLEXsg, HSBE family, RZWS, and
ET System. Hunter warrants the following products to be free of defects in materials or
workmanship under normal use for a period of five (5) years from the original date of
manufacture: PGP Ultra family, I-20, I-25, I-35, I-40, I-60 and I-90 families, Pro-Spray® family,
Pro- Spray® PRS30 family, and Pro-Spray® PRS40 family, I-Core/Dual family and ACC
controller families, ICD Decoder Products, ICR Remotes, IMMS™ Central Control Products,
“Clik” Sensors, Solar-Sync, HQ, ICV plastic, and IBV brass valves, ICZ and PLD tubing, Eco-
Mat, ST System Rotors and Accessories. If used for agriculture applications, Hunter limits the
warranty for its spray, rotator and rotor products to a period of one (1) year from original date of
manufacture. This agriculture limitation supersedes all other warranties expressed or implied.
Hunter warrants the battery life of the Wireless Rain-Clik and Wireless Solar Sync sensors for 10
years. If a defect in a Hunter product is discovered during the applicable warranty period, Hunter
will repair or replace, at its option, the product or the defective part. This warranty does not
extend to repairs, adjustments, or replacement of a Hunter product or part that results from
misuse, negligence, alteration, modification, tampering, or improper installation and/or
maintenance of the product. This warranty extends only to the original installer of the Hunter
product. If a defect arises in a Hunter product or part during the warranty period, you should
contact your local Hunter Authorized Distributor.
HUNTER’S OBLIGATION TO REPAIR OR REPLACE ITS PRODUCTS AS SET FORTH
ABOVE IS THE SOLE AND EXCLUSIVE WARRANTY SET FORTH BY HUNTER. THERE
ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. HUNTER
WILL NOT BE LIABLE TO ANY PARTY IN STRICT LIABLITY, TORT, CONTRACT, OR
ANY OTHER MANNER FOR DAMAGES CAUSED OR CLAIMED TO BE CAUSED AS A
RESULT OF ANY DESIGN OR DEFECT IN HUNTER’S PRODUCTS, OR FOR ANY
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE.
If you have any questions concerning the warranty or its application, please email
[e-mail]
ASAE Certification Statement
Hunter Industries Incorporated certifies that pressure, flow rate, and radius data for these
products were determined and listed in accordance with ASAE Standard S398.1, Procedure for
Sprinkler Testing and Performance Reporting, and are representative of performance of
production sprinklers at the time of publication. Actual product performance may differ from the