Owner's Manual

Problem Causes Solutions

Seasonal Adjust seems high • Region too low

• Water Adjustment setting too high

Decrease the value of the Water Adjustment setting.

If you minimize the Water Adjustment scale at 1 and

still require reduced seasonal adjustment, move up one

Region (from 2 to 3, for example) and start at Water

Adjustment setting 5. Solar Sync will immediately update

the Seasonal Adjust on the Controller. If it is still too high,

repeat the adjustment until the desired seasonal adjust is

showing on the controller.

Solar Sync still sending Seasonal Adjust

when Controller Bypass switch is in the

“Bypass” position

Solar Sync’s automated Seasonal

Adjustment cannot be deactivated by

the Bypass switch. The Bypass switch

only controls the Rain/Freeze shuto

function of the Solar Sync.

TROUBLESHOOTING GUIDE