User guide

ENG
8
PROGRAMMING THE CONTROLLER
5. The time will be displayed. Use the
and
buttons to select AM, PM, or
24 hour. Press the
button to move
to hours. Hours will be flashing. Use
the
and buttons to change the
hour shown on the display. Press the
button to move to minute. Minutes will
be flashing. Use the
and buttons
to change the minutes shown on the
display. The date, day, and time have
now been set.
Setting the Program Start Time(s)
1. Turn the dial to the START TIMES
position.
2. The factory preset is set on program A.
If necessary, you can select program B,
or C by pressing the
button.
3. Use the
or button to change
the start time. (The start times advance in
15 minute increments).
4. Press the
button to add an additional start time, or
button for the next program.
NOTE: One start time will activate all stations
sequentially in that program. This eliminates the
need to enter each station’s start time. Multiple
start times in a program can be used for separate
morning, afternoon, or evening watering cycles.
Start times may be entered in any order. The XC
will automatically sort them.
The XC display shows the time and day when the controller is
idle. The display changes when the dial is rotated to indicate the
specic programming information to enter. When programming,
the ashing portion of the display can be changed by pressing
the
or buttons. To change something that is not ashing,
press the
or buttons until the desired eld is ashing.
Three programs A, B, and C, each with the ability to have four
daily start times, permit plants with different watering require-
ments to be separated on different day schedules.
NOTE: A basic programming rule is that whatever
symbol or character is flashing will be the item
programmed. For instance, if the hour is flashing
when setting the time, the hour can be changed
or programmed. For illustration purposes in this
manual, flashing characters are in GRAY type.
Setting the Date and Time
1. Turn the dial to the CURRENT TIME/DAY
position.
2. The current year will be flashing. Use
the
or buttons to change the year.
After setting the year, press the
button
to proceed to setting the month.
3. The month and day will be in the display.
The month will be flashing and the
icon will be displayed. Use the
or
buttons to change the month. Press the
button to proceed to setting the day.
4. The day will be flashing and the
icon will be displayed. Use the
or
buttons to change the day. Press the
button to proceed to setting the time.
CURRENT TIME/DAY
START TIMES
CURRENT TIME/DAY