Instructions / Assembly

Functional Instructions
More Funtions
Lights Color Temperature Display Strip
Color Temp Adjustable Knob
Sliding left or right can change lights
color temperature
Light touch can turn the lights color temperature to normal white
Positive White Light
Warm White Light
Light touch can turn the lights color temperature to warm
Natural Light
Light touch can change the light color temperature to natural
color temperature and double the brightness
Pairing Button
Touch this button within 10 seconds after the lamp is powered on.The mobile
phone can match the lamp.After the match is successful,the lamp will flash twice.
General Control
Click this button before controlling the lamp,and it can
synchronize all the successfully matched lamps and lanterns.
Partition Control Button
Press this button before you control the lamp.It can
independently control the lamp equipment in this area
Download Smart Light Control APP
Scan the QR Code Below
Support IOS and Android
Power
Track of Lighting Brightness Adjustment
Sliding left and right can adjust the brightness of light
Auxiliary Lighting
Turn on auxiliary lighting after touching lightly
Night Light
Light turns into night light after touching
Voice Control
Enter voice control system after touching
Partition Control Button
Press this button before you control the lamp.It can
independently control the lamp equipment in this area
Partition Control Button
Press this button before you control the lamp.It can
independently control the lamp equipment in this area
APP and Lamp Pairing Methods
1.iPhone or Android/Huawei can be downloaded and installed automatically by scanning the QR code on the instructions.
2.iPhone can be downloaded directly by accessing APP STORE and searching Smart Light Control..
3.Android phones can be downloaded directly by entering the application market to search for Smart Light Control.
4.Huawei Mobile Phone can be downloaded directly by accessing App Treasure and searching Intelligent Light Control.
Auxiliary Lighting
Night Light
Bright
Color Temperature
Pairing Button
Color Temperature
Bright
Warm White Light White Light
Full Bright/Semi-bright
Color Temperature
Switching
NO
OFF
Press this button once in 10 seconds after the lamp has been powered on
After the lamp is electrified,press the SETUP key (code key)on the remote
control quickly in 10 seconds.The light flashes indicate the code is
successful.Otherwise,turn off the total power supply of the lamp,and then
re-operate this step until the light flashes and the alignment is successful.
Long press or click this button,brightness will increase
Long press or click this button,brightness will reduce
Long press this button,the color temperature increases, and the lights
color turns white.
Long press this button,the color temperature drops,and the lights color
turns warm.
Press this button,the lamp turns into warm light (3300K)
Press this button,the lamp turns into white light(6500K)
Click this button to switch the color temperature between white light,warm
light and neutral light.
Press this button to switch the lamp between full power and half power,and
the color temperature of the lamp is neutral light.
Code matching