Installation Guide

L
E
N
3
4
5
1
2
Attention:
1. Please cut off the power supply before installation to
prevent electric shock
(installation by certified electrician is recommended)
2. Due to the different display,
the actual color can be different from the image 3. Due to the manual measurement of lamp body size, there may be a deviation of 1 / 2 inch
4. If you have any questions or lost parts, please feel free
to contact us and we will try our best to help you
1. Put the wire through the middle of the ceiling plate,
and then lock the wire from the side of the iron part
(the length of the wire can be adjusted)
2. Fix the hanging plate to the junction box with the screws on the accessory package
3. Connect the main line of the lamp body with the wire reserved
on the ceiling with the wiring cap
4. Cover the whole lamp to the hanging plate
(let the hanging plate screw expose the ceiling plate)
5. Twist the flower nut onto the exposed hanging plate screw
6. Put the hardware lampshade into the lamp holder
6
7
8
7. Twist the lamp cap ring into the lamp cap (fixing the lamp cover)
8. Twist the bulb into the cap