operation manual

GB | Operating Instructions
10
8. Technical specications
Electric branch saw HESI 750-1 Hurricane
Rated Voltage 230-240 V ~ / 50 Hz
Nominal Consumption 750 W
No-load Speed 6000 min
-1
Guide Bar 200 mm
Cutting length ca. 17,5 cm
Variable height adjustment from 2.10 m to 2.92 m
Working height up to 4 m
Chain speed 11,2 m/s
Oil 90 ml
Weight with bar+chain 3.9 kg
Chain type 91PX033X, 91P033X
Guide Bar type 080SDEA041
Class of Protection II
Sound Pressure Level EN ISO 11680-1:2011 89 dB(A) K = 3 dB
Vibration EN ISO 11680-1:2011 2,61 m/s
2
K = 1,5 m/s
2
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine Direc-
tive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Wear hearing protection. The inuence of noise can cause hearing loss.
Attention!
The vibration value will change on the basis of the area of application of the electric tool and may lie above the
specied value in exceptional situations.
Keep the development of noise and vibration to a minimum!
• Only use properly functioning machines.
• Maintain and clean the machine regularly.
• Adapt your working method to the machine.
• Do not overstress the machine.
• If necessary, have the machine inspected.
• Switch the machine off when it is not in use.
• Wear work gloves.
Attention: Noise protection! Please observe the local regulations when operating your device.