User Manual
www.PyleUSA.com
20
SPEED MODES
To activate dierent speed modes, ensure the Hurtle Scooter is
powered ON and not in motion. Press the power button once, the
speed mode indicator should light up on your display to indicate
which speed mode is activated.
CRUISE CONTROL
To activate cruise control while riding, press the throttle down for 6
seconds, you will hear a beep and the cruise control indicator will
light up on the LED display indicating that it is activated; Press the
Throttle down once or squeeze the Brake Handle to cancel cruise
control.
PUSH TO START
For safety reasons, the scooter will not accelerate unless it is already
moving at least 1.8mph (3km/h). You must rst kick o the ground
and then press the throttle in order to ride the scooter.
BEFORE RIDING
Before each cycle of operation, the operator shall perform the
pre-operation checks specied below:
• That all guards and pads originally supplied by the manufacturer
are in proper place and in serviceable condition.
• That the area that the unit is to be operated in is safe and suitable
for safe operation.
• That the braking system is functioning properly.
• That all safety labels are in place and understood by the operator
and any passenger.
• That any and all axle guards, chain guards, or other covers or
guards supplied by the manufacturer are in place and in
serviceable condition.
• That tires are in good condition, inated properly, and have
sucient tread remaining.