User Manual
www.PyleUSA.com
22
OPERATING YOUR DEVICE
Make sure the device is fully charged before the rst initial use.
Before turning on your Hurtle Scooter, ride it like a normal kick
scooter to get comfortable with the device before using it with the
motor.
When comfortable riding the scooter, power it on. For the motor
to activate, you must rst start riding the scooter and then push
the throttle down with your thumb.
To slow down the scooter, disengage the throttle and squeeze the
brake handle to engage the disk brake. The brake is pressure
sensitive so a tighter grip means more stopping power.
To turn, use the handlebar to turn in the direction you wish to turn.
The Hurtle Scooter can be operated manually if you do not wish
to use the motor.
As you get comfortable on the device, you will notice it becomes
easier to maneuver. Remember at higher speeds, it is necessary to
shift your weight to overcome the centrifugal force.
Prepare to brace yourself if you encounter bumps or uneven
surfaces, then dismount and carry your Hurtle Scooter to a safe
operating surface.
WARNING
Do not turn sharply or at high speeds to avoid danger.
Do not turn or ride quickly along slopes, as it may cause injury.
WEIGHT AND SPEED LIMITATIONS
Speed and weight limits are set for your own safety.
Please do not exceed the limits listed in the “Specications” section
of this manual.