User Manual

4.1 How to ride

1. Turn on the Scooter by press the Power key for 2

seconds and check the battery power.

2. Once the power is on it is safer to start riding with one

foot on the deck and give a kick by other foot to speed

up the scooter to 6km/h, then push accelerator and

place the other foot on the deck, this is safer and more

controlled than pulling o with two feet on the deck

as you will have less control and stability with two feet

on the deck. Skillfully use the accelerate throttle to

speed up or slow down when riding.

3. To stop riding, release the throttle and use the electric

brake to gradually coast to a stop then step o the

scooter one foot at a time. Be extra cautions when

dismounting for the rst time.

4. Turn o the scooter when nish using the product by

press the power key for 3seconds.

4. How to ride

Warning:

There is risk of falling down during learning, so make sure to wear helmet and protection kits all the time.

Warning: If scooter has both electric brake and rear physic rear brake, the electric brake is prior to rear brake, which is

only used as auxiliary brake when electric brake does not work properly, or in an urgent situation, use the eletric brake

and rear brake at the same time.

DO NOT step on rear brake for a long time, or it will break the tyre and fender. Mechanism to reduce speed will get hot

from continuous use, do not touch after braking.