Pre-Delivery/Install Checklist

1. Electrical drill or ratchet driver 5. Wire stripper or cutter

2. 1/2" drill bit for drilling pilot holes 6. Aluminum foil tape and/ or duct tape

3. 1 1/4" drill bit for drilling electrical Electrical supplies for wiring

wiring access hole (if applicable) (i.e marrettes and electrical tape)

4. #2 Phillips screwdriver or driver bit

1x Fan 1x Grille Assembly 4x Mounting Brackets 4x Flange Screws

(Includes 2x Grille Springs)

1-888-293-5662

Tools and Materials Required

Parts Supplied

Cyclone Range Hoods Inc.

Info@CycloneRangeHoods.com

www.CycloneRangeHoods.com

Bath Fan Installation

PAGE 1
Bath Fan Installation Tools and Materials Required 1. Electrical drill or ratchet driver 2. 1/2" drill bit for drilling pilot holes 3. 1 1/4" drill bit for drilling electrical wiring access hole (if applicable) 4. #2 Phillips screwdriver or driver bit 5. Wire stripper or cutter 6. Aluminum foil tape and/ or duct tape Electrical supplies for wiring (i.e marrettes and electrical tape) Parts Supplied 1x Fan 1x Grille Assembly (Includes 2x Grille Springs) 4x Mounting Brackets Cyclone Range Hoods Inc.