Instructions / Assembly

* Electrical Drill * Wire Stripper & Cutter

* 1/2" Drill Bit for Drilling Pilot Holes into joist * Aluminum Foil Tape & or Duct Tape

* 1-1/4" Drill Bit for Drilling Electrical Wiring * Electrical Supplies for Wiring

Access Hole Through Joists (If Applicable) i.e Marrettes (wirenuts), Electrical Tape

* #2 Phillips Screwdriver or Driver Bit & Cable Connectors

1x Plain Grille

1x Fan (Includes 2x Grille Springs)

2x Knobs for Humidity Sensor & Timer

4x Mounting Brackets 4x Flange Screws

Hushtone by Cyclone

ENERGY STAR BATH FAN WITH HUMIDITY SENSOR & TIMER

Bath Fan Parts Supplied

Bath Fan Installation- Tools & Materials Required

PAGE 1
Hushtone by Cyclone ENERGY STAR BATH FAN WITH HUMIDITY SENSOR & TIMER Bath Fan Installation- Tools & Materials Required * * * * Electrical Drill 1/2" Drill Bit for Drilling Pilot Holes into joist 1-1/4" Drill Bit for Drilling Electrical Wiring Access Hole Through Joists (If Applicable) #2 Phillips Screwdriver or Driver Bit * * * Wire Stripper & Cutter Aluminum Foil Tape & or Duct Tape Electrical Supplies for Wiring i.
PAGE 2
Bath Fan Pre- Installed Electrical Wiring 1x Black 1x White 1x Green Humidity Sensor & Timer Pre-Installed Electrical Wiring 1x Brown 2x White 1x Black For ideal set up, 1 switch is required Switch- Fan function Humidity Sensor & Timer wired to a constant and independent power source for automatic operation For more information, contact the manufacturer Cyclone Range Hoods Inc. www.CycloneRangeHoods.com Info@CycloneRangeHoods.