User Guide

2061.doc
10/26/2004
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not
completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back
of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain
flat. In colder climates this “relaxing” may take longer; moving the liner inside will speed up the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable.
The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work
well. Use of Armor All
®
, Son-of-a-Gun
®
or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR JEEP GRAND
CHEROKEE CARGO LINER
TO ACCESS THE FACTORY CARGO TIE-DOWN
ATTACHMENT POINTS WITH YOUR LINER IN
PLACE, TRIM AWAY THE FOUR (4) AREAS
LOCATED ABOVE THE ATTACHMENT POINTS.
(SHOWN HERE CIRCLED/DARKENED). TRIMMING
IS EASILY DONE USING A UTILITY KNIFE OR
SIMILAR CUTTING TOOL. USE THE MOLDED IN
TRIM GROOVE AS A TRIMMING GUIDE.