User Guide

2131.doc
09/16/02
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not
completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back
of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain
flat. In colder climates this “relaxing” may take longer; moving the liner inside will speed up the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable.
The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work
well. Use of Armor All
®
, Son-of-a-Gun
®
or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR HUMMER H
2
CARGO
LINER (WITH INSIDE SPARE TIRE)
TO INSTALL THE OPTIONAL THIRD ROW SEAT IN YOUR HUMMER, JUST TRIM AWAY THE MATERIAL
INSIDE OF THE FOUR BANDED AREAS (SHOWN ABOVE HATCHED). YOU CAN TRIM JUST THE LONG
SIDES AND ONE END, TUCKING THE REMAINING FLAP UNDER THE SECURING BAR (SEE PHOTOS ON
BACK). MAKE CERTAIN THAT THE SEAT IS SECURELY FASTENED BEFORE OPERATING YOUR VEHICLE.