User Guide
2881_Installation Instruction
07/20/2010
CARE AND USE INSTRUCTIONS
Thank you for selecting a WeatherBeater™ Trunk Liner from Winfield Consumer Products. Your new cargo
liner is custom molded to fit your Kia Sorento (with 3
rd
row seats and these seats folded flat). Upon removal
from the box your liner will not completely unroll and lay flat. This is normal and only temporary. Just place the
liner on the floor or in the trunk of your vehicle with a weight in each corner (a book works well). After about
15 minutes, your liner will remain flat. In colder climates this “relaxing” may take longer; moving the liner to a
heated area will speed the process.
Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable.
The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work well. Do not use Armor All
®
, Son-of-a-Gun
®
or similar items as these products make the liner slick.
CARGO LINER INSTALLATION INSTRUCTIONS
FOR YOUR 3
rd
ROW SEAT EQUIPPED KIA SORENTO
YOUR SORENTO CARGO LINER FITS TO THE BACK OF THE 2
ND
ROW SEAT IN SORENTO MODELS
EQUIPPED WITH 3
RD
ROW SEATS. THE SEATS MUST BE FOLDED FLAT BEFORE THE LINER IS INSTALLED.
YOUR LINER IS DESIGNED TO ALLOW ACCESS TO THE FACTORY TIE-DOWN HOOK LOCATIONS WITH
THE LINER IN PLACE. TO ACCESS THE HOOKS, YOU WILL NEED TO REMOVE THE MATERIAL FROM THE
RECESSED AREAS OF THE LINER LOCATED DIRECTLY IN FRONT OF THE HOOKS. THESE AREAS
(CIRLCED ABOVE) ARE RECESSED ON THE LINER TO AID TRIMMING. A UTILITY KNIFE WORKS WELL
FOR TRIMMING.