User Manual

3130.DOC

Rev: 0

01/31/01

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place of

your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new

floor liners. However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409

or Glass Plus

work well.

Use of Armor All

, Son-of-a-Gun

or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR FULL SIZE

CHEVROLET/GMC EXTENDED CAB TRUCK

IF YOUR VEHICLE IS EQUIPPED WITH A MANUAL TRANSFER CASE SHIFTER, YOU WILL NEED TO

TRIM YOUR LINER AS SHOWN ABOVE. TRIM AWAY THE RAISED AREA ALONG THE WALL OF

YOUR LINER. YOUR LINER WILL NOW FIT AROUND THE TRANSFER CASE SHIFTER HOUSING. A

UTILITY KNIFE OR HEAVY SCISSORS WORKS WELL FOR TRIMMING YOUR LINER.

LEFT OR

DRIVER’S SIDE

RIGHT OR

PASSENGER’S SIDE

PAGE 1
THANK YOU FOR SELECTING A HUSKY FLOOR LINER FROM WINFIELD CONSUMER PRODUCTS CARE AND USE INSTRUCTIONS Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor liners. However, do not remove the factory-installed carpeting. Your liners are made from an engineering resin that is lightweight and extremely tough and durable.