User Guide

9848_Installation Instructions 03_14_2013

CARE AND USE INSTRUCTIONS

Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front

floor liners are custom molded to fit your Honda Accord Sedan (4-Doors). The liners are made to take the place

of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing

your new floor liners. However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409

or Glass Plus

work

well. Use of Armor All

, Son-of-a-Gun

or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR

HONDA ACCORD FRONT FLOOR LINERS

YOUR ACCORD LINERS ATTACH TO THE FACTORY “TWIST LOCK” FASTENERS. YOU MUST REMOVE

THE FACTORY MATS BEFORE INSTALLING YOUR ACCORD LINERS. MAKE SURE YOUR LINERS ARE

SECURED TO THE TWIST-LOCK FASTENERS BEFORE OPERATING THE VEHICLE. IF YOU HAVE ANY

TROUBLE SECURING THE LINERS PLEASE CONTACT HUSKY LINERS AT 800-344-8759.

(PROCEED TO BACK PAGE)

LEFT OR DRIVER’S SIDE

RIGHT OR PASSENGER’S SIDE

PAGE 1
CARE AND USE INSTRUCTIONS Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front floor liners are custom molded to fit your Honda Accord Sedan (4-Doors). The liners are made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor liners. However, do not remove the factory-installed carpeting.
PAGE 2
IN YOUR PACKAGING YOU WILL FIND A COMPONENT BAG WITH A FASTENER THAT WILL BE USED TO SECURE THE PASSENGER SIDE LINER IN PLACE. LOCATE THE FASTENER IN YOUR PACKAGING, REMOVE IT AND UNSCREW THE CAP FROM THE BASE (SEE IMAGE 1 BELOW). NEXT INSERT THE THREADED PORTION OF THE BASE INTO THE HOLE IN THE PASSENGER SIDE LINER, INSERTING IT FROM THE BACK SIDE OF THE LINER (SEE IMAGE 2 BELOW).
PAGE 3
CARE AND USE INSTRUCTIONS Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new rear floor liners are custom molded to fit your Honda Accord Sedan (4-Doors). The liners are made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor liners. However, do not remove the factory-installed carpeting.