User Guide

9897 Installation Instruction Front_Back

04/12/2013

CARE AND USE INSTRUCTIONS

Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front

floor liners are custom molded to fit your Toyota RAV4. The liners are made to take the place of your factory

floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor

liners. However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409

or Glass Plus

work

well. Use of Armor All

, Son-of-a-Gun

or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR TOYOTA RAV4

FRONT WeatherBeater® FLOOR LINERS

TO EASE INSTALLATION OF YOUR RAV4 FRONT FLOOR LINERS, MOVE THE FRONT SEATS TO THEIR

REAR MOST POSITION. INSTALL THE LINERS IN YOUR VEHICLE MAKING SURE THE FACTORY TWIST-

LOCK MAT RETAINERS IN YOUR VEHICLE’S FLOOR PAN ARE FASTENED TO THE TWIST-LOCK

CONNECTOR IN YOUR FLOOR LINERS. ONCE YOU HAVE INSTALLED THE LINERS, REPOSITION YOUR

FRONT SEATS AS NEEDED.

LEFT OR DRIVER’S SIDE

RIGHT OR PASSENGER’S SIDE

PAGE 1
CARE AND USE INSTRUCTIONS Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front floor liners are custom molded to fit your Toyota RAV4. The liners are made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor liners. However, do not remove the factory-installed carpeting. Your liners are made from an engineering resin that is lightweight and extremely tough and durable.
PAGE 2
CARE AND USE INSTRUCTIONS Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new rear floor liner is custom molded to fit your Toyota RAV4. The liner is made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor liners. However, do not remove the factory-installed carpeting. Your liner is made from an engineering resin that is lightweight and extremely tough and durable.