User Manual

9805 Installation Instructions Front_Back

08/16/2012

CARE AND USE INSTRUCTIONS

Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new rear

floor liner is custom molded to fit your Jeep Grand Cherokee and Dodge Durango. The liner is made to take the

place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before

installing your new floor liners. However, do not remove the factory-installed carpeting.

Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409

or Glass Plus

work

well. Use of Armor All

, Son-of-a-Gun

or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR DODGE DURANGO

& GRAND CHEROKEE SECOND SEAT FLOOR LINER

TO EASE INSTALLATION OF YOUR 2

SEAT DURANGO / GRAND CHEROKEE FLOOR LINER,

FIRST MOVE THE FRONT ROW SEATS TO THEIR MOST FORWARD POSITIONS. WITH THIS DONE,

INSERT LINER IN VEHICLE THEN REPOSITION THE FRONT SEATS AS DESIRED.

IF YOUR VEHICLE IS EQUIPPED WITH THE OPTIONAL 2

ROW BUCKET SEATING WITH A

CONSOLE POSITIONED BETWEEN THE SEATS, YOU WILL NEED TO TRIM YOUR LINER AS

SHOWN ABOVE. TRIMMING IS EASILY DONE USING THE MOLDED IN TRIM GROOVE AS A

GUIDE. A UTILITY KNIFE OR HEAVY SHEARS WORK WELL FOR TRIMMING.

FRONT OF

VEHICLE