Installation Manual

CARE AND USE INSTRUCTIONS

Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front

floor liners are custom molded to fit your Jeep Cherokee. The liners are made to take the place of your factory

floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor

liners. However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409

or Glass Plus

work

well. Use of Armor All

, Son-of-a-Gun

or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR

JEEP CHEROKEE FRONT FLOOR LINERS

PLEASE NOTE THAT YOUR JEEP CHEROKEE FLOOR LINERS ARE DESIGNED TO ATTACH TO

THE EXISTING FACTORY FLOOR MAT RETENTION HOOKS. THE FACTORY MATS MUST BE

REMOVED BEFORE INSTALLATION. TAKE CARE TO MAKE SURE THE LINER IS FULLY SEATED

OVER THE HOOK DURING INSTALLATION.

LEFT OR DRIVER’S SIDE

RIGHT OR PASSENGER’S SIDE

9909_Installation Instructions 03_20_2015

PAGE 1
CARE AND USE INSTRUCTIONS Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front floor liners are custom molded to fit your Jeep Cherokee. The liners are made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor liners. However, do not remove the factory-installed carpeting.
PAGE 2
CARE AND USE INSTRUCTIONS Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new rear floor liner is custom molded to fit your Jeep Cherokee. The liner is made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor liners. However, do not remove the factory-installed carpeting. Your liner is made from an engineering resin that is lightweight and extremely tough and durable.