User Manual

9824 Installation Instructions Front and Back
08/03/2013
CARE AND USE INSTRUCTIONS
Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new rear
floor liner is custom molded to fit your Chevrolet Silverado/GMC Sierra Double Cab truck. The liner is made to
take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before
installing your new floor liners. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work
well. Use of Armor All
®
, Son-of-a-Gun
®
or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR CHEVROLET SILVERADO /
GMC SIERRA DOUBLE CAB TRUCK 2ND SEAT FLOOR LINERS
TO EASE INSTALLATION OF YOUR SILVERADO/SIERRA DOUBLE CAB TRUCK SECOND SEAT
LINER, MOVE BOTH FRONT ROW SEATS TO THEIR MOST FORWARD POSITION AND FLIP UP
THE 2
ND
ROW SEATS. WITH THIS DONE, INSTALL YOUR LINER, POSITIONING IT AS SHOWN IN
THE IMAGE ABOVE. ONCE THE LINER IS INSTALLED, REPOSITION THE FRONT SEATS AS
DESIRED AND LOWER YOUR 2
ND
ROW SEATS.
YOUR LINER WILL WORK IN CONJUNCTION WITH HUSKY LINER GEARBOX™ PART #09041.
FRONT OF
VEHICLE