Installation Manual

9920 Installation Instructions Front and Back
03_11_2014
CARE AND USE INSTRUCTIONS
Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front
floor liners are custom molded to fit your Chevrolet Tahoe & GMC Yukon. The liners are made to take the
place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before
installing your new floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work
well. Use of Armor All
®
, Son-of-a-Gun
®
or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR
CHEVROLET TAHOE /GMC YUKON FRONT FLOOR LINERS
TO EASE INSTALLATION OF YOUR NEW FRONT LINERS, MOVE BOTH FRONT ROW SEATS TO
THEIR MOST REARWARD POSITION. WITH THIS DONE, INSTALL THE LINERS AS SHOWN
ABOVE. THE DRIVERS SIDE LINER HAS TWO HOLES WHICH SNAP OVER THE FACTORY MAT
RETAINERS. ONCE YOU HAVE INSTALLED YOUR LINERS, REPOSITION THE SEATS AS DESIRED.
LEFT OR DRIVER’S SIDE
RIGHT OR PASSENGER’S SIDE

Summary of content (2 pages)