User Manual

9957 Installation Instruction Front_Back
01/18/2013
CARE AND USE INSTRUCTIONS
Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front
floor liners are custom molded to fit your Toyota 4Runner. The liners are made to take the place of your factory
floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor
liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work
well. Use of Armor All
®
, Son-of-a-Gun
®
or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR TOYOTA 4RUNNER &
FRONT WeatherBeater® FLOOR LINERS
TO EASE INSTALLATION OF YOUR 4RUNNER FRONT FLOOR LINERS, MOVE THE FRONT SEATS
TO THEIR REAR MOST POSITION. WITH THIS DONE, ALL FACTORY FLOOR MATS MUST BE
REMOVED AND THE LINERS INSTALLED. NOTE THE LINERS ATTACH TO THE TWIST-LOCK
FASTENERS LOCATED IN THE FLOOR PAN.
LEFT OR DRIVER’S SIDE
RIGHT OR PASSENGER’S SIDE

Summary of content (2 pages)