Installation Manual

9958 Installation Instruction 3 pages with warranty
09/19/2013
CARE AND USE INSTRUCTIONS
Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new rear
floor liner is custom molded to fit your Toyota Tundra CrewMax trucks. The liner is made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your
new floor liners. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work
well. Use of Armor All
®
, Son-of-a-Gun
®
or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR TOYOTA
TUNDRA CREWMAX SECOND SEAT FLOOR LINER
TO EASE INSTALLATION OF YOUR TUNDRA SECOND SEAT LINER, MOVE THE FRONT SEATS TO
THEIR MOST FORWARD POSITIONS AND FOLD UP THE SECOND ROW SEATS. WITH THIS DONE,
INSERT THE LINER IN VEHICLE ANGLING THEM SO THAT THE FRONT EDGE OF THE LINER IS
SEATED INTO PLACE FIRST, THEN, LOWERING THE REAR EDGE. ONCE THE LINER IS
INSTALLED, REPOSITION THE FRONT SEATS AS DESIRED.
FRONT OF VEHICLE