Phau Ntawv Qhia
Daily
• Check for leaks / stains.
• Check for damage.
• Check for smooth rotation of swivel.
Monthly
• Check "remove after" date.
Annually
• Conduct pull test - disconnect
Safe-T-Break
®
, inspect interior for debris,
discoloration, and foreign matter.
• All drive aways, maintenance and inspection
activities must be logged using the serial
number of the individual product.
• Apply city, state, or federal testing regulations
as appropriate.
ANY TEST / INSPECTION FAILURE REQUIRES
IMMEDIATE EQUIPMENT REPLACEMENT OR
REMOVAL FROM SERVICE..
TESTING / MAINTENANCE / INSPECTION
DEF Swivel • Safe-T-Break
®
Combo
DEF Inline Swivel/
STB Combo
This device separates between 180-400 lbs force (800-1780N).
This device is designed for use at DEF (Diesel Exhaust Fluid)
and AdBlue
®
AUS 32 dispensing facilities only.
Page 1
MADE IN THE USA
dispensing device must be securely bolted to the dispensing island.
2. Attach scale to where the Swivel • Safe-T-Break
®
Combo will be installed. Apply 400 lbf / 1,780 N pull force at
various angles and check dispenser and hose for damage. If no damage occurred, release pull and complete
installation. Ensure all threads are free of DEF. Use water to clean.
®
.
4. Do not use pipe thread sealant of any kind on the threads of the hose section.
®
Combo.
7. Push guard back over Safe-T-Break
®
until it rests in the groove.
Nozzle end
of hose
Safe-T-Break
®
Hose swivel
end
Nozzle
and Inspection Instructions
^012828, ^012831, ^012887, ^013185, ^014438, *014438A