Instructions / Assembly

Ball bearing slides
Friction slides
OPERATOR’S MANUAL
4-DRAWER BASE CABINET
MODEL # 27BC401BP-THD
CAPACITIES
SERVICE PARTS
SAFETY
• The maximum load capacity for each drawer is 30 lbs. evenly
distributed. The maximum load capacity for the stainless steel
work surface is 500 lbs. evenly distributed.
• Empty weight of the unit is 83.5 lbs.
• The maximum product weight, including contents, stored in the
drawers/shelves and on the work surface is 703.5 lbs.
F1776
DANGER is used to indicate a hazardous situation which,
if not avoided, will result in serious injury or death.
WARNING indicates a hazardous situation which,
if not avoided, could result in serious injury or death.
CAUTION is used to indicate a hazardous situation which, if not
avoided, may result in minor injury, moderate injury, or property
damage.
CAUTION: Read and follow all Safety Rules and Operating
Instructions before rst use of this product.
DANGER
• DO NOT stand on this product. You may fall
or cause product to tip.
• DO NOT open more than one drawer. The product
may become unstable and tip.
• DO NOT step in the drawers. You may fall
or cause product to tip.
• DO NOT mount this product on a truck bed
or any other moving object.
• DO NOT move the product prior to closing
and locking all the drawers. The drawers could come open
and make the product unstable and tip.
CAUTION
• This product is not designed to be directly lifted with a fork lift, or
to be towed with any mechanical devices.
• The maximum weight for each drawer should never be exceeded.
• Only transport this product empty. Properly secure when transporting.
• DO NOT exceed maximum product weight, including contents. See
Capacities for more information.
WARNING
• WEAR SAFETY GLASSES when removing or repositioning
the slides.
• DO NOT pull the unit, push it when moving
• USE THE BRAKES when not moving this product. This will
prevent the product from rolling.
• DO NOT alter this product in any manner. For example, do not
weld external lockbars or attach electrical equipment.
• Keep the product on level surfaces. The product may become
unstable and tip if stored or moved on an uneven surface.
• BE CAREFUL when closing the cover. Remove hands before
the cover closes completely.
• Lubricate lock with graphite, (yearly).
STAINLESS SURFACES:
• Stainless steel can discolor when exposed to pool chemicals,
saltwater or cleaners with bleach.
• Keep your stainless looking new by cleaning with a good quality
all-in-one stainless steel cleaner polish monthly. Frequent clean-
ing will remove surface contamination that could lead to rust.
• Do not clean with steel wool or other abrasive pads.
• Do not use cleaners not specically intended for stainless
steel on stainless surfaces (this includes glass, tile and
counter cleaners).
MAINTENANCE
LOCATING MODEL # INFORMATION
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
PAINTED SURFACES:
• Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
• Auto wax will preserve the unit’s luster nish. Apply the wax
as to a car. The wax will also help protect the unit against
scratches.
• Grease and oil can be removed with most standard
cleaning uids. For safety, use a nonammable cleaning uid.
• If drawer liners are supplied, it is recommended they are used
to protect the nish inside the drawers and to make the drawers
easier to clean. The drawer liners may be cleaned
with soap and water.
CALL 1-866-440-3170 FOR SERVICE PARTS. Please provide
the Model Number when calling. To expand your garage storage
project, please visit www.homedepot.com/garagestorage for ad-
ditional product options.