Instructions / Assembly

Process:

• Install (4) levelers DD. Some adjustment may be

necessary after cabinet is in desired location.

• Stand cabinet upright.

• Re-install drawer removed in Step 1. (See Operation

Section B)

• Carefully place stainless top back on top of unit.

• Move unit to desired position and check that unit is level.

If needed, adjust leveling feet (See Operations

Section D).

INSTALL LEVELING FEET

Items Needed:

DD - Screw Leveler (Qty:4)

OPERATION

Release

• Empty the drawer.

• Fully extend the drawer.

REMOVING DRAWERS

Lever Style - Lift or lower (depending on the slide) the

release lever on both sides, (this allows the slides to ride

over the stops.) Pull out to remove.

Tab Style - Depress the release tabs on both sides,

(this allows the slides to ride over the stops.)

Pull out to remove.

REMOVING PROTECTIVE FILM FROM STAINLESS

STEEL

• Starting at one of the corners, peel back the protective

coating from the stainless top.

• Be sure to remove all the protective coating before

initial use.

• Follow the cleaning methods in the maintenance

section to keep the stainless looking new.