Installation Guide

1/4 IN x 25 FT
POWER DRUM AUGER
1002 494 614
How to Operate:
• Can be operated manually or with drill
• Press the quick-release cable lock to release the cable
• Feed cable into the drain to reach blockage
• Press the quick-release cable lock to secure the cable
• Spin cable in clockwise direction to dislodge debris
• To Use with a drill: attach power drill to shank on back
of the Auger for added power but use lowest PRM
1
Press the quick-release cable
lock to release the cable
2
Feed cable into the drain
to reach blockage
3
Press the quick-release
cable lock to secure
the cable
Wear appropriate protective
equipment including safety
glasses and leather gloves.
WARNING
When using a Drill to spin the Auger, use the lowest
RPM mode and gently spin cable to dislodge debris