Item # 0000000000 Model # 8200445 USE AND CARE GUIDE 4 GALLON PORTABLE POLY WET/DRY VACUUM Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM THANK YOU We appreciate the trust and confidence you have placed in Husky through the purchase of this vacuum. We strive to continually create quality products designed to enhance your home.
Table of Contents Safety Information.........................................................2 Warranty.........................................................................3 Pre-Assembly ................................................................4 Assembly........................................................................6 Operation .......................................................................7 Care and Maintenance .................................................
Safety Information (continued) for grounding be added. Servicing a double-insulated Wet/Dry Vacuum requires extreme care and knowledge of the system and should be done only by qualified service personnel. Replacement parts for a double-insulated Wet/Dry Vacuum must be identical to the parts they replace. Your double-insulated Wet/Dry Vacuum is marked with the words "DOUBLE INSULATED" and the symbol (square within a square) may also be marked on the appliance.
Pre-Assembly PACKAGE CONTENTS A B G F C D E H I J K Key No.
Pre-Assembly TOOLS REQUIRED Phillips Screw Driver HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA Part Description AA Screw ST 3.9X16F Quantity 4 5 HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
Assembly WARNING: To reduce the risk of fire or explosion, do not operate this vacuum in areas with flammable gases, vapors or explosive dust in the air. Flammable gases or vapors include but are not limited to: lighter fluid, solvent-type cleaners, oil-based paints, gasoline, alcohol or aerosol sprays. Explosive dusts include but are not limited to: coal, magnesium, aluminum, and grain or gun powder. Do not vacuum explosive dust, flammable or combustible liquids or hot ashes.
Operation 1 Dry Pick-up 2 Wet Pick-up INSTALLING THE CARTRIDGE FILTER □ The cartridge filter (M) can be used for wet or dry pick-up. Installation is the same for both. □ With the power head in an upside down position, slide the cartridge filter (M) down over the lid cage and push the filter seals against the power head.
Care and Maintenance FILTER REPLACEMENT – REPLACE WITH MULTI-FIT CARTRIDGE FILTER SKU#332340 WARNING: To reduce the risk of injury from accidental starting, unplug the power cord before changing or cleaning the filter. Your filter should be cleaned often to maintain peak vacuum performance. WARNING: Do not remove the filter cage and float. The float prevents water from entering the impeller and damaging the motor. The cage prevents fingers from touching the moving impeller.
Care and Cleaning WARNING: To reduce the risk of injury from accidental starting, unplug the power cord before emptying the dust tank. 1. Remove the power head assembly of the wet/dry vacuum by pulling outward on the lid clips located on each side of the vacuum. Lift off the power head assembly. 2. Dump the tank contents into the proper waste disposal container.
Service Parts Key No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Part No.
Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. – 7 p.m., EST, Monday-Friday 9 a.m. – 6 p.m., EST, Saturday 1-888-43-HUSKY HUSKYTOOLS.COM Retain this manual for future use.