Instructions / Assembly

Item # 10001 389 620
Model # 828H
DIGITAL SLIDING T-BEVEL
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. – 7 p.m., Monday-Friday
9 a.m. – 6 p.m., EST, Saturday
1-888-HD-HUSKY
HUSKYTOOLS.COM
Questions, problems, missing parts?
Before returning to the store, call Husky Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-888-HD-HUSKY HUSKYTOOLS.COM
Retain This Manual For Future Use
Safety Information
Warranty
THANK YOU
We appreciate the trust and confidence you have placed in Husky through the purchase of this
Digital Sliding T-Bevel. We strive to continually create quality products designed to enhance your
home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Husky!
INSTRUCTION GUIDE
WARNING: All users and bystanders must wear safety goggles to protect eyes.
LIFETIME GUARANTEED
If your Husky Hand tool ever fails, bring it back and we will replace it Free. This full
warranty gives you specic rights, and you may also have other rights, which vary
from state to state.
For details, visit your nearby store, contact the Customer Service Team at 1-888-HD-
HUSKY or visit www.HUSKYTOOLS.COM.
Pre-Operation
1
Turning On/Off
□ Press the ON/OFF button (Part A) to turn the Digital T-Bevel on or off.
□ The unit will also shut off automatically after 5 minutes of inactivity.
2
Setting the Display to Zero
□ After turning on, reset the display to 0° by aligning the angled end of the
blade with the handle and pressing the ZERO button (Part B).
□ While the device is on, pressing this button again will zero the digital
display.
3
General Operation
□ Open the blade to the desired angle to be measured.
□ Screw down the locking screw to save the angle.
□ You can also press the HOLD/FLIP button (Part D) and this will hold the
measurement for transfer.
□ Press the HOLD/FLIP button (Part D) to invert the display.
□ Press the REV button (Part C) to get the reverse/supplementary angle
readout.
4
Installing the Battery
□ Slide the battery tray out (Part E).
□ Insert the battery with the positive side down.
□ Slide the battery tray back in.
Part Description
A ON/OFF Button
B ZERO Button
C REV Button
D HOLD/FLIP Button
E Battery Tray
A
C
E
B
D
PRODUCT DESCRIPTION