Instructions / Assembly

Determine if the orientaon of your ceiling rack will be installed parallel or perpendicular to the direcon of your
ceiling joists. Use a stud nder to locate the joists if ceiling is nished with drywall.
Check the spacing of your ceiling joists to ensure that they will work for the size and direcon of your ceiling rack
install. If the spacing of your joists are 16” there should be ceiling joists located in the necessary posion. The
illustraons shown in this manual are based on 16” joist spacing. See note below for opons if spacing is an issue.*
3
*Note: If the spacing of your ceiling joists does not match the desired assembled size and direcon of your ceiling
rack installaon you will need to install an addional joist support in the correct posion (not included). See below
for suggested addional joist support soluons. If your unsure how to install addional joist supports, consult with
your local professional contractor for assistance.
Parallel
Perpendicular
96
"
For a parallel installaon ensure that the ceiling
joists are 32” apart.
For a perpendicular installaon ensure that the ceiling
joists are or 96” apart.
Assembly Instrucons
32
"
Step 1 - Plan the Installaon
Note: Measure from center to center
of ceiling joists using a tape measure.