Instructions / Assembly
7
Assembly Instrucons
Step 7 - Install Beam Assemblies
Tap down lightly on beam with rubber
mallet to seat the beam clips into the
tapered ends of the slots.
Step 6 - Assemble Le and Right Beams (E & F)
72” Assembly
✓
✓
E
F
96” Assembly
E
F
✓
F
F
E
E
Bolt together one Le Beam (E) and one Right Beam (F) at the determined 72” or 96” length assembly by using four
Hex Bolts (L), four Lock Nuts (M) and eight Small Washers (N). Repeat steps to assemble the other Le and Right
Beam.
Install one beam assembly by aaching both ends of the beam into the boom slots of each post. Use a rubber
mallet to lightly tap down on each end of the beam to properly seat the beam clips into the tapered ends of the slot.
Bolt together by using one Hex Bolt (L), one Lock Nut (M) and two Small Washers (N) per side into the lined up holes
of the beam and post. Repeat step to install the other beam assembly to other posts assemblies.