User manual: Stainless steel CSS1 Refrigerator and FSS2 Freezer To ensure safe operation, please read this user manual thoroughly before use. © 2017 Husky. Husky reserve the right to change specifications at any time without notice. Images used are for illustration only. Stock not included. International CSS1_FSS2 manual 2017.
Welcome to your new Husky Thank you for buying this Husky commercial refrigerator/freezer. It has been designed and manufactured for many years of trouble-free service. Operation is very simple, but please take a few minutes to read this user manual. It contains important safety information, and tips to ensure you receive the best possible service from your Husky unit. CONTENTS Important Notes...................................................................................................................
All models Important Notes WARNING: RISK OF ELECTRICAL SHOCK HAZARD USERS IN EUROPE: This refrigeration unit must be earthed. If the power cable is damaged, it must be replaced by a qualified engineer to avoid shock hazard. DO NOT ATTEMPT TO SERVICE THE ITEM YOURSELF. Ensure that the unit is properly earthed. Stop using the unit immediately if electric shock is felt when touching the cabinet. DISPOSAL OF OLD REFRIGERATORS BE SURE TO MAKE ANY LOCKS UNUSABLE.
The manufacturer does not accept responsibility for any damages that may arise due to nonobservation of these instructions. • Do not use the unit if it is damaged. If you are in any doubt, consult an engineer. • Connection and installation of your Husky unit are to be carried out in strict compliance with the relative instructions in this user manual. • Make sure there is a suitable power outlet (230 volts, 13 amps outlet) with proper grounding to power the refrigerator/freezer.
Troubleshooting Before calling Technical Support, please check the following points; you may be able to solve any problem yourself. Problem Solution The sound of flowing liquid may be heard. This is the refrigerant circulating and is part of normal operation. There is frost on the unit. A little frost develops if the ambient humidity is high. Wipe away with a soft cloth. The compressor cannot be heard but the refrigerator/freezer’s inner temperature reads normally. This is part of normal operation.
Stainless steel CSS1 Refrigerator & FSS2 Freezer Operating Instructions TO OPERATE THE THERMOSTAT Connect the unit to a power outlet. The unit will start automatically. Select your desired temperature using the control knob: 0 = OFF 1 = Least cold setting 7 = Coldest setting. DEFROSTING The unit defrosts automatically at preset intervals.
(Model CSS1 pictured) 1. Temperature display 2. Condenser/compressor compartment 3. Lock 4. Control knob 7 International CSS1_FSS2 manual 2017.
Stainless steel CSS1 Refrigerator & FSS2 Freezer Circuit Diagram CSS1 Refrigerator FSS2 Freezer 8 International CSS1_FSS2 manual 2017.
International CSS1_FSS2 manual 2017.
International CSS1_FSS2 manual 2017.
International CSS1_FSS2 manual 2017.
Welcome to Husky, the home of smart refrigeration. We are a leading global refrigeration specialist with over 25 years experience in quality refrigeration for convenience and hospitality professionals, and we have a great range of chillers for the home too. You’ll find Husky products all over the world, so whatever your requirements we’re sure to have a good looking energy-efficient model that’s perfect for you.
