Use and Care Manual

ManualsBrandsHusky ManualsGarage Cabinets & Storage Systems72 in. H x 30 in. W x 18 in. D Steel Tall Garage Cabinet

THANK YOU

We appreciate the trust and confidence you have placed in Husky through the purchase of this cabinet. We strive to continually

create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Husky!

USE AND CARE GUIDE

30 IN. STORAGE CABINET

Questions, problems, missing parts?

Before returning to the store, call

Husky Customer Service

8 a.m. - 5 p.m., EST, Monday - Friday

1-888-HD-HUSKY

WWW.HUSKYTOOLS.COM

Item #

Model #

Due to continuing improvements,

the actual product may differ slightly

from the product described herein.

G3002T-US

1003 244 675

Summary of content (12 pages)

PAGE 1
Item # 1003 244 675 Model # G3002T-US USE AND CARE GUIDE 30 IN. STORAGE CABINET Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m. - 5 p.m., EST, Monday - Friday 1-888-HD-HUSKY WWW.HUSKYTOOLS.COM Due to continuing improvements, the actual product may differ slightly from the product described herein. THANK YOU We appreciate the trust and confidence you have placed in Husky through the purchase of this cabinet.
PAGE 2
Table of Contents Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Service Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Coordinating Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
Specifications Maximum load for each door 11 lbs. / 5 kg Maximum load for each shelf 150 lbs. / 68 kg Maximum load for bottom panel 150 lbs. / 68 kg Maximum total load 622 lbs. / 282 kg Pre-Assembly TOOLS REQUIRED Hex Wrench (Hex Key) Drill (not included) Safety Goggles (not included) Socket (10mm) (not included) Hex Screwdriver Bit Gloves (not included) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
PAGE 4
Pre-Assembly (continued) PACKAGE CONTENTS I A H B C G D E Part Description F Quantity 1 Part F Description A Top panel B Shelf 3 C Left side panel 1 G H Bottom panel Right side panel Back panel D Left door 1 I Safety strap E Right door 1 4 Quantity 1 1 5 1
PAGE 5
Assembly 1 2 ATTACHING THE SIDE AND BOTTOM PANELS 1 NOTE: Assemble on a flat surface. A piece of cardboard is recommended to keep the product from being scratched during assembly. NOTE: Middle holes on side panels are for coordinating with 72 in. solid wood work surface only depends on your desire. CAUTION: Please wear gloves during the whole assembling process.
PAGE 6
Assembly (continued) 3 ATTACHING THE TOP PANEL Attach the top panel (A) to the side panels (C & G) with eight M6 x 16 hex socket head screws (AA). Insert the screws by hand. DO NOT tighten. AA X8 G A C 4 ATTACHING THE BACK PANELS CAUTION: Make sure your floor is free of debris or the cabinet face is protected before laying the cabinet on its face. □ Lay the cabinet on its face. □ Attach the back panels (H) to the back of the cabinet with fourteen M6 x 16 hex socket head screws (AA).
PAGE 7
Assembly (continued) 5 6 INSTALLING THE SHELVES □ Insert twelve shelf brackets (CC) into the slots on the side panels (C & G) at the desired heights. Make sure the four brackets (CC) for each shelf (B) are at the same height. ATTACHING THE DOORS □ Insert the pins from the hinges on the left door (D) into the slots of the bottom hinges at the front of the left side panel (C). □ Place the shelves (B) over the shelf brackets (CC). □ Repeat the same procedure to attach the right door (E).
PAGE 8
Assembly (continued) 7 INSTALLING THE GROMMETS □ Insert the short side of hex wrench by half at your desired cord access holes, and pry the knock-outs towards your side. □ Drop off the knock-outs carefully and install the grommets (GG).
PAGE 9
Assembly (continued) 8 CONNECTING THE CABINET TO THE WALL View from cabinet top CAUTION: The M6 x 40 hex tapping bolts (BB) should be drilled into the stud of the wall. View from inside of cabinet EE X1 CAUTION: The safety bracket’s bottom M6 x 40 hex tapping bolt should be 70.4 in. from the floor. I □ Install the safety bracket (EE) to the wall with two M6 x 40 hex tapping bolts (BB).
PAGE 10
Service Parts I BB L EE AA A H B GG C CC D J G FF F E K Part K Replacement Part DD Quantity Part Replacement Part J L AA 304212 304213 # Description Key A B 120524 Top panel 2 1 241112 Shelf 3 C 120522 1 D 120526 120528 120525 120523 Left side panel Left door 1 BB CC Right door Bottom panel 1 E F G H I 241111 314230 312033 # Description Lock Magnet Quantity 1 2 M6 x 16 hex socket head screw DD 320327 320328 203902 313066 Adjustable foot 4 EE 314230 Safety b
PAGE 11
Coordinating Products This product coordinates well with the units below to offer a best storage solution. They can be combined into various combinations to meet different storage requirements. 1 NOTE: You can choose caster set for base cabinets for convenient movement depends on your desire. 72 In. Solid Wood Work Surface 28 In. Wall Cabinet 30 In. Storage Cabinet 28 In. 2-Door Base Cabinet 28 In. 1-Drawer 2-Door Base Cabinet 11 36 In. Pegboard 5 In. x 2 In. Caster Set WWW.HUSKYTOOLS.
PAGE 12
Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m.-5 p.m., EST, Monday-Friday 1-888-HD-HUSKY WWW.HUSKYTOOLS.COM Retain this manual for future use.