Use and Care Manual

7
5
6
Assembly (continued)
WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
CC
X 12
INSTALLING THE SHELVES
ATTACHING THE DOORS
Insert twelve shelf brackets (CC) into the slots on the side
panels (C & G) at the desired heights. Make sure the four
brackets (CC) for each shelf (B) are at the same height.
Place the shelves (B) over the shelf brackets (CC).
B
C
Slots on the inner
front side of side
panel
Slots on the inner
back side of side
panel
Insert the pins from the hinges on the left door (D) into the
slots of the bottom hinges at the front of the left side panel (C).
Repeat the same procedure to attach the right door (E).
Close the doors to see if the doors can touch the magnets
completely. If not, adjust the cabinet’s top and side panels to
make sure the shape of the cabinet is square and flush. Until
the doors can catch the magnets completely, tighten the top
and back panels’ screws.
magnet
D
C
E
G
G