Use and Care Manual

Assembly (continued)
Bracket
X2
POSITIONING THE BASE CABINETS
10
CAUTION: The M6 x 40 hex tapping bolts (BB)
should be drilled into the stud of the wall.
12
Wall
31 in.
floor
BB
X 2 each
II
X 1 each
Attach the work surface on the L brackets (N) with four screws (AA).
Make sure the side with Husky logo faces the front. Use two
screws (AA) on each side.
Place the liner (with logo) (E1) on top of the base cabinets and place
the base cabinets underneath the work surface.
Bolt the safety bracket (II) for each base cabinet with two bolts (BB)
to the stud in the wall and fasten the base cabinet by using the
safety strap (JJ) to tie the base cabinet and safety bracket (II)
together.
View from
cabinet top
II
X 1 each
View from
inside of cabinet
JJ
x 1 each
IMPORTANT: The side with HUSKY logo should
face the front.
AA
X 4 each
N
X 2 each
E1
x 1 each
Stud