Use and Care Manual

Care and Cleaning
Periodically clean the drawer fronts, drawer trim, and other surfaces with a mild detergent and
water.
6
Maintenance
1
Caster maintenance
2
Drawer maintenance
Grease the casters annually using high-quality
bearing grease.
Lubricate the slides semi-annually.
Operation
1 2
Re-inserting the drawers Removing the drawers
Fully extend the empty drawer.
Push up the one release lever while pulling
down on the other release lever.
Pull the drawer outward until it is released from the
drawer slide.
Extend the drawer slides.
Insert the brackets on each side of the drawer into
the slots in the slides, being careful that they are
properly positioned.
Once properly inserted, completely close the drawer
to set the slides in their proper positions.

Summary of content (1 pages)