Use and Care Manual

Maintenance

Caster maintenance

□

Grease the casters annually using high-quality

bearing grease.

Drawer maintenance

□

Lubricate the slides semi-annually.

Care and Cleaning

□ Periodically clean the drawer fronts, drawer trim, and other surfaces with a mild detergent and

water.

□

you would on a car.

□

Operation

Removing the drawers

Re-inserting the drawers

□ Fully extend the empty drawer.

□ Push up the one black release lever while

pulling down on the other black release lever.

□ Pull the drawer outward until it is released from

the drawer slide.

□ Extend the drawer slides.

□ Insert the brackets on each side of the drawer into

the slots in the slides, being careful that they are

properly positioned.

□ Once properly inserted, completely close the

drawer to set the slides in their proper positions.

PAGE 1
Operation 1 Removing the drawers □ □ □ Fully extend the empty drawer. Push up the one black release lever while pulling down on the other black release lever. Pull the drawer outward until it is released from the drawer slide. 2 Re-inserting the drawers □ □ □ Extend the drawer slides. Insert the brackets on each side of the drawer into the slots in the slides, being careful that they are properly positioned. Once properly inserted, completely close the drawer to set the slides in their proper positions.