Full Product Manual

A
B
BB
Assembly
1
Attaching the cabinet handle
Position the cabinet handle (B) over the holes on the
cabinet (A).
Attach with the bolts (BB) and tighten with supplied
wrench (CC) or 10mm wrench/socket.
NOTE:
The holes in the cabinet are tapped and do not
require nuts.
HUSKYTOOLS.COM
5 Please contact 1-888-HD-HUSKY for further assistance.
Attaching the casters
□
□
□
Be sure the drawers are locked and lay the cabinet (A)
□ emas eht no ,tinu eht ot )D( sretsac leviws eht hcattA
side as the handle, inserting bolts (AA) through the swivel
casters(D) and into the cabinet (A).
□ Tighten with supplied wrench (CC) or 12 mm wrench/socket.
□ Repeat this process for the
xed casters (C) on the
opposite side of the cabinet (A).
□ Return the cabinet (A) to its upright position.
CAUTION: Do not over tighten the bolts.
2
Operation
1
Removing the drawers
2
Re-inserting the drawers
Fully extend the empty drawer.
□
□
elihw revel esaeler eno eht pu hsuP pulling
down on the other release lever.
□ Pull the drawer outward until it is released from the
drawer slide.
Extend the drawer slides.
□
□
Insert the brackets on each side of the drawer into
the slots in the slides, being careful that they are
properly positioned.
□ Once properly inserted, completely close the drawer
to set the slides
in their proper positions.