Use and Care Manual

7 HUSKYTOOLS.COM
.ecnatsissa rehtruf rof YKSUH-DH-888-1 tcatnoc esaelP
Pre-Operation
TECHNICAL SPECIFICATIONS
Ratchet
Model H38CPRAT
Motor 12V DC
No-Load Speed 0-230 rotations / min
Torque Range 30 ft-lb (40.5Nm)
Square Drive 3/8” (10mm)
Optimum Operating
Temperature
32°F(0°C) to 104°F(40°C)
Weight 2.15 lbs.
SYMBOLOGY
V Volts …/min No-load revolutions per minute(RPM)
Hz Hertz
To reduce the risk of injury, user must read instruction
manual.
A Amperes
The tool is listed by the Intertek Testing Services, to United
States and Canadian Standards.
~ Alternating current Meets CEC energy requirements
Direct current
KEY PARTS DIAGRAM
WARNING: Remove the cordless ratchet from the package and examine it carefully. Do not discard
the carton or any packaging material until all parts have been examined. Do not allow familiarity with
the ratchet to cause a lack of alertness. A fraction of a second of carelessness is enough to cause
severe injury.
Charger
Model 7106
Input 100-240V ~ 50/60Hz
Output
12V 1.8A
Charging Time 70 min
Optimum
Operating
Temperature
32°F(0°C) to 104°F(40°C)
Weight 0.27 lbs.
Part Description
A 3/8” square anvil
B Forward/reverse lever
C Paddle switch
D Lock button
E LED worklight
F Remaining power indicator
G Charger
A
E
B
F
D C
G
BC
n
0