Instructions / Assembly
Operation
1
Removing the drawers
2
Re-inserting the drawers
Fully extend the empty drawer.
□
□
elihw revel esaeler eno eht pu hsuP pulling
down on the other release lever.
□ Pull the drawer outward until it is released from the
drawer slide.
Extend the drawer slides.
□
□
Insert the brackets on each side of the drawer into
the slots in the slides, being careful that they are
properly positioned.
□ Once properly inserted, completely close the drawer
to set the slides
in their proper positions.
□
3
Usage of rubber grommet
When passing cords into the box, be sure to always
enter box from the rear. After head of cord is in place,
slightly pull back 2-3”to ensure weather resistant ”star
bursts”are facing toward the outside of box. Never
push the cord from inside box so that mating plug
points are exposed to the environment.
□
BE SURE TO FOLLOW ALL ELECTRICAL SAFETY PRECAUTIONS.
7 Please contact 1-888-HD-HUSKY
HUSKYTOOLS.COM
for further assistance.